Enclosed Vertical Platform Lift

• Rated Load750 lbs. (340 kg.
• DriveBelt driven ball screw / 90 VDC 1/2 hp motor with brake. Optional 24 VDC battery powered unit
• Power Supply115 VAC – 20 amp grounded circuit / 220 VAC (optional)
• Control Circuit24 VAC (Low Voltage Controls)
• Standard Platform36″ x 60″ & 42″ x 60″ (straight-through) with 42″ (107 cm) high guard panels and grab rail / stationary ramp
• Footprint50″ x 54″ (127 cm x 137.2 cm)
• Speed10 fpm (3 mpm)
• ControlsConstant pressure paddle switch with emergency stop (key switch optional)
• Manual LoweringProvided
• Safety DesignASME A18.1, Section 2 – Vertical Platform Lifts
• StandardsCSA B44.1 / ASME A17.5 – Elevator & Escalator Equipment
• Safety FeaturesSafety pan, final limit, ball nut safety backup, belt monitor and non-skid surface
• Warranty2-Year parts / 1-Year on outdoor units

1. Call Signature Elevator & Accessible Design for a general discussion. It is always a good idea to send picture to info@signatureelevators.com. Schedule a consultation at the showroom.
2. Meet in the showroom for a review of products, solutions and budget. Schedule a site survey at your house.
3. Site survey will determine one or more possible solutions and locations for those solutions. General budgeting of project. Request a feasibility and investigation agreement.
4. Review and sign your feasibility & investigation agreement.
5. Schedule Signature Elevator & Accessible Design feasibility & investigation crew to come to you house.
6. Review & sign your Project Construction Agreement.
7. Your EPL enclosed vertical platform lift is manufactured.
8. Concurrently construction of concrete platform, electrical requirements and modifications to side of the house for doors & other modifications are complete.
9. Your enclosed vertical porch lift arrives and is installed in about a week.

We will supply, install and service outside of DC metro area limited to the southern border of Virginia, the western border of West Virginia and Pennsylvania, the Northern border of Pennsylvania and New Jersey and of course the eastern shore of VA, MD, DE and NJ. Outside of the DC metro area we follow the following process:

1. Call Signature Elevator & Accessible Design for a general discussion. It is always a good idea to send pictures to info@signatureelevators.com.
2. Receive, complete & return your measurement package.
3. Review & sign your EPL Installation Agreement.
4. Once your install agreement is signed your measurements will be checked on site by a Signature Elevators & Accessible Design technician.
5. Your EPL enclosed vertical platform lift is manufactured.
6. Concurrently construction of concrete platform, electrical requirements and modifications to side of the house for doors & other modifications are completed by you or your contractor.
7. Your EPL enclosed vertical porch lift arrives, along with Signature Elevator & Accessible Designs installation crew and is installed in about a week.

Construction, Manufacturing & Installation: $40,000 to $60,000

Manufacturing & Installation Only: $35,000 to $55,000